|
| |
|
|
VBA and Maple application in process engineering problematics.
Farkač, Daniel ; Jegla, Zdeněk (referee) ; Kohoutek, Josef (advisor)
The task of the diploma thesis named VBA and Maple Application on Process Engineering Problems is to show the possibilities of using these programming languages for various engineering tasks. Particularly the programming language Visual Basic for Application (VBA), which is a part of MS Office package, is very little used in practise. That´s why this thesis solves the complex task of a furnaces design process; the topic was reccomended by the supervisor prof. Ing. Josef Kohoutek, CSc. Specifically, the thesis deals with calculations of heat transfer and optimization of the height of extended surfaces of tubes in the convection section of process furnaces. The entire task is elaborated in VBA and runs in Excel. After entering the input information, the created program first calculates the size and heat output of the convection section, but it can also optimize the height of extended surfaces in different parts of the convection section and thus minimize investment costs.
|
|
|
Vehicle Kinematics and Dynamics Simulations
Zháňal, Lubor ; Bauer, František (referee) ; Píštěk, Václav (referee) ; Kaplan, Zdeněk (advisor)
This paper focuses on the kinematic and dynamic numerical simulation of mechanisms by applying a numerical method, and a complex simulation programme built on it, developed by the author. Described are mathematical principles of the numerical method used and also the programming progression of the important parts of the application and its optimization. The final part includes comparative measuring of the accuracy and performance.
|
|
|
Mathematical Models of Demand
Trzaskaliková, Eva ; Půža, Bedřich (referee) ; Mezník, Ivan (advisor)
The diploma thesis deals with the analyses of demand using standard tools of engineering mathematics. Mathematical models of demand, both single and multi- factor are investigated. Elasticity of demand is applied for decision making in price policy. Problems of optimization of demand reflecting utility and budget constraints are under consideration. Constructions of demand curve and compensated demand curve are presented. The text is accompanied by illustrative examples aiming at methodical aspects of the work
|
|
|
Organizational Optimization of SK HS Kromeriz Football Club
Šturma, Zdeněk ; Roman, Sklenář (referee) ; Lepková, Hana (advisor)
The subject of the bachelor´s thesis is organizational structure analysis of a selected football club and its optimalization. The theoretical part describes organizational structures in sports clubs, their utilization in different areas and also classification in football competitions. The practical part focuses on problem solving in a real football club, SWOT analysis and the possibility of implementation of the changes into its structure.
|
|
|
Electrochemical analytical devices for thick-film sensors measurement
Pytlíček, Zdeněk ; Adámek, Martin (referee) ; Prášek, Jan (advisor)
This work covers an area of electrochemical analytical systems for trace determination of dissolved species in water solutions with use of thick-film sensors. Several types of common electrochemical devices including special ones used for sensors are described and compared in this work. The main goal of this work is to find the suitable electrochemical arrangement with the best, reliable and reproducible current response of the thick film sensors. A new electrochemical arrangement, which should eliminate disadvantages of common devices and unite their advantages with optimization for thick film sensors, is designed here. For better current response of the sensor, suitable improvements and optimization of the new electrochemical arrangement prototype were done in this work. All measurements were done on standard electrochemical couple of potassium ferro-ferricyanide using the cyclic voltammetry. In the end of this work, all the devices are compared in term of their features and presumptions for the best detection limit of the thick film sensors.
|
|
|
Optimization of Energy Flow During WWTP Operation - Smart Area Net
Pěcha, Jiří ; Máša, Vítězslav (referee) ; Braciník,, Peter (referee) ; Mastný, Petr (advisor)
The dissertation work deals with the issue of water treatment and possibilities of energy savings during the operation of sewage treatment plants. The aim of the work is to find the potential of alternative energy use, economical consumption, improvement of the facility system management and quality improvement of the wastewater treatment process. In the first part of the work, operating processes, energy flows and energy savings are discussed. To analyze the problematics, larger sewage treatment plants were chosen. Thanks to their size, it was easier to find critical points and test the usage of renewable sources in operation. After the energy audit, the individual processes were assessed and real operation pitfalls were determined. Further steps led to focusing on smaller facilities up to 2 000 PE. This step was carried out with the intention of preparing these plants for the planned legislative change and helping to create or modernize more energy-efficient solutions. Thanks to the establishment of consortium of Brno University of Technology, the Department of Electric Power Engineering and a company dealing with water treatment and automation control, a solution was created that modernize the electrical, automation and water treatment part of the plant operation. This innovative application was installed in the sewage treatment plant, where the issues were debugged, control algorithms were tested and the entire operation was launched in automatic mode. At the end of the wastewater treatment plant modernization, PV panels were installed on the roof, thus partially suppling the object with renewable energy.
|
|
|
Design Optimization of Bucket Conveyors
Jonák, Martin ; Svěrák, Tomáš (referee) ; Zegzulka, Jiří (referee) ; Malášek, Jiří (advisor)
This thesis deals with a study of methods sufficient to describe the behavior of bulk materials (homogeneous and non-homogeneous) during their transport by bucket elevators in the application focused on the optimization of the bucket shape and also on the optimization of operating parameters of whole elevator. More specifically, this thesis is based on the studying and creating analytical and numerical computational models which are used for description of flows and deformations especially of particulate materials. Firstly, the thesis is focused on the process of discharging the bucket – the relationship among the shape of the surface of a particulate material and geometry, position and movement of the bucket. The beginning and way of discharge of the bucket will be determined. Secondly, the thesis includes the overall computational model of a bucket elevator which is based on discrete element method and presented in the case study. The goal is to determine the limits of some classical physical and mathematical descriptions.
|
|
|
Calculation and optimization of synchronous servomotor reluctance torque.
Kroupa, Martin ; Hájek, Vítězslav (referee) ; Ondrůšek, Čestmír (advisor)
This work is mainly focused on construction and design simulation of synchronous servomotor. This motor is built by 30 permanent magnets which are attached to rotor and solved in Ansoft Maxwell 14 software. The main purpose was to calculate reluctance torque, which is significant during the motor operational mode and its optimization. Ansoft Maxwell 14 can analyze in 2D mode as well as in 3D mode, for analysis it uses method of finite elements. Subjects can be analyzed in static conditions, or in any way of transient movement. Optimization in 2D, where we will change the shape in the area of air gap, will only be used as revision that the reluctance torque is bounded with this factor. The main simulations were supposed to be done in 3D model, where the role of rotation should have been taken in account to the final result. These simulations were replaced by alternative calculation. On behalf of achieved results, the optional rotation is stated in the end of my work.
|
|
| |
guest ::
